TECHNICAL SPECIFICATIONS

• Power supply: three-phase 400V ac +/- 10% 50/60 Hz.
• Output voltage: 4 - 6 - 8 - 12 - 16 - 20 - 24 V.
• Output current: 1 - 2 - 5 - 10 - 20 - 30 - 50 - 100 - 150 - 200 - 250 - 300 - 400 - 500 - 600 A.
• Regulation range: from 2 to 100% of output voltage or current.
• Voltage ripple: less than 1% over whole regulation range.
• Efficiency: 89%, regardless of the load factor.
• Protection: against short-circuits, phase loss, overtemperature, overvoltage.
• Cooling: forced air.
• Max. room temperature: 40°C.
• Max. humidity: 85%.

THESE MODELS COME COMPLETE WITH A MICROPROCESSOR FEATURING A LIQUID CRYSTAL DISPLAY, WHICH GIVES

1 Operating volts.
2 Operating amps.
3. Total amps (six-digit reading).
4 Partial amps (five-digit reading) or preset value for power supply's end of cycle once the
predetermined operating ampere-time is up.
5 End-of-cycle timer, which can be programmed in: hours, minutes, seconds.
6 Product dosing ampere-time in: ampere-hours / ampere-minutes / ampere-seconds.
7 Product dosing time in: hours, minutes, seconds.

CONTROL LOCAL

1 Via fully programmable digital control panel

REMOTE

1 Via RS 485 serial line.
2 1-Mbit CANopen network.
3 12-Mbit PROFIBUS.
4 Manual control via illuminating buttons and potentiometers.
5 Analogue option via 0-10V dc or 4-20mA signals.